ePlane e200X eVTOL Gets Lynx Software: India’s electric aviation ambitions have received an important technology boost as The ePlane Company, an IIT Madras-incubated aerospace startup, has selected LYNX MOSA.ic from US-based Lynx Software Technologies for its e200X electric vertical take-off and landing aircraft.
Announced in November 2026, the collaboration focuses on improving onboard computing architecture, software isolation, and the management of safety-critical aircraft functions.
The platform will allow different software applications to operate on shared computing hardware while maintaining separation between essential flight systems and other mission-specific applications.
The development is particularly important as ePlane prepares its aircraft for future passenger transport, emergency medical services, and urban cargo operations.
🚀 The ePlane Company Selects LYNX MOSA.ic for e200X Aircraft
The ePlane Company has chosen LYNX MOSA.ic as the mixed-criticality software platform for mission computing aboard its upcoming e200X aircraft.
Lynx announced the selection at eVTOL Show USA in Santa Clara, California, on November 17, 2026.
The partnership addresses an important challenge in modern aviation: allowing multiple software systems to operate efficiently without compromising the reliability of essential aircraft functions.
Unlike conventional aircraft designed around a relatively fixed set of missions, the e200X is being developed as a modular electric aircraft capable of performing different roles.
Each mission may require different sensors, applications, and computing workloads.
However, the systems responsible for essential aircraft operations must continue functioning predictably.
LYNX MOSA.ic is intended to provide the software separation needed to support these requirements.
✈️ ePlane e200X: LYNX MOSA.ic Architecture
How safety-critical and mission-specific software can operate on shared computing hardware while remaining isolated.
LYNX MOSA.ic
Partitioned Mission Computing Platform
Separation Kernel + Type 1 Hypervisor🛡️ Flight-Critical Systems
- Vehicle Management
- Energy Management
- Predictable execution
- Isolated computing resources
📡 Mission Applications
- Sensor Data Processing
- Situational Awareness
- Pilot-Assistance Functions
- Mission-Specific Software
🤖 Separate AI Processing Platform
Heavy AI workloads run separately and communicate through controlled interfaces with the mission computing system.
🚁 Planned e200X Applications
Source: Lynx Software Technologies announcement, 17 November 2026. Simplified conceptual diagram; not a complete aircraft system design. DO-178C DAL A certification capability does not mean the e200X aircraft has completed certification.
✈️ What Is the ePlane e200X eVTOL Aircraft?
The e200X is a three-seat electric vertical take-off and landing aircraft being developed by The ePlane Company.
Its seating configuration accommodates one pilot and two passengers.
The aircraft uses a lift-and-cruise design, combining vertical take-off and landing capabilities with forward flight.
This approach is intended to support operations in locations where conventional airport infrastructure may not be practical.
Three Planned Applications
1. Passenger Air Taxi Services
The e200X is being developed for short-distance urban passenger transport, potentially offering an alternative to congested ground routes.
2. Emergency Air Ambulance Operations
A medical configuration could support emergency transport requirements, subject to suitable equipment, operational approvals, and certification.
3. Urban Cargo Transportation
A cargo configuration could carry goods between urban locations using an aircraft adapted for logistics missions.
The modular airframe allows different payloads, sensors, and software arrangements to be considered for these roles.
However, the aircraft remains under development, and the announcement does not establish that commercial passenger or emergency operations have begun.
🛡️ How LYNX MOSA.ic Improves Software Isolation
One of the most important features of LYNX MOSA.ic is its ability to separate applications according to their safety and security requirements.
This approach is known as mixed-criticality computing.
In a modern electric aircraft, different software systems perform different responsibilities.
Vehicle management and energy management applications support essential aircraft operations.
Other applications may process sensor information, support situational awareness, or provide pilot-assistance capabilities.
These systems do not necessarily require identical levels of safety assurance.
LYNX MOSA.ic allows them to share computing resources while operating within separate partitions.
This separation is designed to prevent faults or unexpected behaviour in one application from interfering with another.
For example, a problem affecting a lower-criticality situational awareness application should not automatically compromise a separately protected flight-critical function.
The architecture therefore supports both efficient computing and stronger fault isolation.
💻 ARINC 653 and Type 1 Hypervisor Technology Explained
The platform uses a separation kernel-based Type 1 hypervisor.
A hypervisor is software that manages computing resources and allows multiple operating environments or applications to share physical hardware.
A Type 1 hypervisor operates directly on the underlying hardware rather than depending on a conventional host operating system.
LYNX MOSA.ic provides individual applications with defined space and time partitions.
What Is ARINC 653?
ARINC 653 is an aviation software interface standard associated with partitioned operating environments.
It supports controlled allocation of computing resources and helps maintain separation between applications.
For the e200X, vehicle and energy management systems are intended to run within ARINC 653 partitions.
Lower-criticality applications, including sensor processing and enhanced situational awareness functions, will operate separately.
This architecture can help engineers manage complex software requirements while maintaining predictable behaviour.
🤖 How Artificial Intelligence Fits Into the e200X
Artificial intelligence may play an important role in future electric aircraft, particularly in processing sensor information and assisting pilots.
However, AI applications can require substantial computing resources.
The e200X architecture addresses this challenge by placing heavy AI processing on a separate platform.
The mission computing system will provide controlled interfaces between that AI platform and other aircraft systems.
This arrangement is intended to preserve safety and cybersecurity boundaries.
It also allows mission-specific software to evolve without requiring every part of the aircraft’s computing architecture to change.
Importantly, the announcement does not mean that the e200X is an autonomous passenger aircraft.
Its stated configuration includes a pilot, and the reported AI functions concern processing and assistance rather than a confirmed pilotless operating capability.
🔐 DO-178C DAL A: Why Certification Matters
LYNX MOSA.ic is designed to support certification under DO-178C Design Assurance Level A.
DO-178C is an important standard used in the development and assurance of airborne software.
Design Assurance Level A applies to software associated with the most severe potential failure conditions.
A platform designed for this level of assurance can help aircraft developers establish the evidence needed for certification activities.
However, the platform’s certification capability does not mean the complete e200X aircraft has already received regulatory approval.
Aircraft certification involves extensive assessments covering hardware, software, flight performance, safety, and other requirements.
The selection of LYNX MOSA.ic represents a technology-development decision within that broader process.
🇮🇳 IIT Madras Startup ePlane Advances India’s Electric Aviation Ambitions
Founded in 2019, The ePlane Company operates as Ubifly Technologies Private Limited.
The company was incubated at the IIT Madras Incubation Cell and is developing electric aircraft for advanced air mobility applications.
Its operations are based at the IIT Madras Discovery Campus in Thaiyur, near Chennai.
According to the company’s information, it has established a dedicated facility for electric aircraft prototyping, manufacturing, and testing.
The company has also reported significant testing experience through its ATVA and e50 technology demonstrators.
Its flagship e200X programme has entered the Directorate General of Civil Aviation’s official type-certification process.
The company has additionally reported receiving Design Organisation Approval from the DGCA.
These developments represent steps in aircraft development and regulatory engagement, rather than confirmation of final aircraft certification.
📊 e200X Aircraft and Software Platform: Key Details
| Feature | Details |
|---|---|
| Aircraft | e200X |
| Manufacturer | The ePlane Company |
| Software provider | Lynx Software Technologies |
| Platform | LYNX MOSA.ic |
| Aircraft type | Electric VTOL |
| Seating capacity | 3 — one pilot, two passengers |
| Aircraft design | Lift-and-cruise, modular |
| Planned missions | Passenger, cargo, air ambulance |
| Software architecture | Mixed-criticality partitioning |
| Partitioning standard | ARINC 653 |
| Virtualisation technology | Type 1 hypervisor |
| Software assurance capability | DO-178C DAL A |
| AI processing | Separate computing platform |
🌍 Why This Development Matters for Urban Air Mobility
Electric vertical take-off and landing aircraft are attracting interest as potential solutions for urban transport, emergency response, and specialised logistics.
However, commercial deployment requires more than efficient propulsion and innovative aircraft designs.
Developers must also demonstrate dependable computing systems, robust cybersecurity, predictable software behaviour, and compliance with aviation safety requirements.
The ePlane–Lynx collaboration addresses part of this challenge.
By separating safety-critical and mission-specific applications, the architecture could simplify future software development and reduce interference risks.
It may also help ePlane adapt its aircraft to different commercial roles without redesigning the entire computing environment.
These are potential engineering advantages, not proof that the aircraft is ready for commercial service.
❓ Frequently Asked Questions (FAQs)
1. What is the ePlane e200X eVTOL?
The e200X is a three-seat electric vertical take-off and landing aircraft being developed by India’s The ePlane Company for passenger, cargo, and air ambulance applications.
2. What is LYNX MOSA.ic?
LYNX MOSA.ic is a mixed-criticality software platform designed to run applications with different safety requirements on shared computing hardware while maintaining isolation.
3. How many passengers can the e200X carry?
The announced configuration has three seats: one pilot and two passengers.
4. What is the purpose of ARINC 653 in the e200X?
ARINC 653 partitioning helps isolate flight-critical applications from other software, supporting predictable operation and controlled resource allocation.
5. Has the ePlane e200X received final aviation certification?
The company reports that the e200X has entered India’s DGCA type-certification process. The software announcement does not establish that final aircraft certification has been granted.
📝 Conclusion
The ePlane e200X eVTOL software partnership with Lynx represents a meaningful development in India’s emerging electric aviation industry.
By selecting LYNX MOSA.ic, The ePlane Company aims to support essential aircraft systems and mission-specific applications within a partitioned computing architecture.
The technology is intended to improve software isolation, support safety assurance activities, and provide flexibility for passenger, cargo, and emergency medical configurations.
With its IIT Madras roots and ongoing aircraft development programme, ePlane is working toward a future in which electric aircraft could support multiple urban mobility applications.
The next major milestones will depend on successful engineering integration, testing, regulatory certification, and operational readiness.
The key takeaway: LYNX MOSA.ic provides an important software foundation for the e200X, but the aircraft’s commercial future will depend on completing the wider development and certification process.
